考虑跟踪制导的小天体着陆轨迹闭环优化方法

针对小天体着陆环境存在参数不确定性及初始状态偏差的特点,提出一种小天体着陆闭环优化方法,实现在节省燃料消耗的同时降低对参数的敏感度。首先,建立小天体着陆动力学模型,分析了燃料最优着陆问题;然后,采用线性二次型调节器设计了反馈制导律,推导闭环敏感度矩阵方程,构造燃料消耗和敏感度加权的性能指标,进而能够通过优化降低小天体着陆过程的敏感度。仿真结果表明,该闭环优化方法能有效降低对参数不确定性和初始状态偏差的敏感度,最终达到提高小天体着陆位置和速度精度的目标。     

月球南极着陆区关键特性分析

与月球中低纬度着陆区不同,月球南极地区地形地貌条件较为恶劣,太阳高度角低,对地可见与不可见周期较长,这些关键特性都对南极着陆探测任务提出了挑战。文章结合国内外已开展的研究工作,对南极地区的光照条件、对地可见、地形地貌等方面进行了分析和总结,得到了上述关键特性的规律。南极地区不存在永久光照区,但存在一些几百米尺度的4~9个月的准连续光照区,着陆器的光照条件与着陆器高度密切关联;南极地区光照条件和对地可见受地形影响较大;在50m基线情况下,备选着陆区域平均坡度比较平缓(0°~5°);着陆器尺度5m基线情况下,不同备选着陆区域平均坡度相差较大,最大平均坡度可以达到25°。根据上述分析,对我国开展月球南极探测的任务规划和探测器系统设计提出了建议,主要包括着陆区的选择及探测器主要功能组成等。     

基于多工况的新型着陆器软着陆性能优化

以新型腿式着陆器为研究对象,建立其刚柔耦合动力学分析模型,实现着陆器软着陆过程的仿真。通过仿真计算,确定着陆器最易翻倒、底面最易与星球表面岩石碰撞、主体承受最大碰撞力的3组恶劣着陆工况。分析着陆器缓冲机构构型选取设计变量,基于仿真得到的3组恶劣工况,应用第二代非劣排序遗传算法(NSGA-Ⅱ)实现着陆器软着陆性能的优化,优化目标为增强着陆器抗翻倒能力、降低着陆器底面与星球表面岩石碰撞的可能性、降低着陆器主体最大受力值。将优化所得参数代入模型重新进行仿真,着陆器不再发生翻倒,着陆平台底面与星球表面最小距离提高4.2%,主体最大受力值降低12.1%。     

雷达信号误差对舰载机全自动着舰控制的影响

基于常规舰载机使用的全自动着舰系统(ACLS),以及现役的作为主要导引方式的雷达导引着舰,分析了雷达导引过程中的信号误差对着舰的影响。从全自动着舰系统的组成和作用出发,建立完整的着舰仿真系统与环境,加入雷达信号测量数值、时间延迟和噪声杂波干扰3种不同类型的误差,以仿真误差存在时的着舰状况。通过计算着舰成功率,及其随误差量值的绝对值增大而减小的特点,验证了结果的正确性。该方法定量分析雷达信号误差的影响,既有助于着舰理论的研究,也对工程设计和应用具有指导意义。     

软体弯曲驱动器设计与建模

与传统的"刚性"机器人相比,基于仿生学启发的软体机器人由于其与生俱来的柔顺性和安全性受到广泛关注。然而,此类软体机器人驱动器的设计与控制目前仍缺少理论指导。针对这些问题,设计了一种由气压驱动的可实现弯曲运动的新型软体驱动器,在系统分析其结构和弯曲原理的基础上,利用几何方法和虚功原理建立了其数学模型,并且通过有限元模型和原理样机实验验证了数学模型的有效性,为软体机器人驱动器的优化设计和控制提供了依据。     

舰载飞机着舰航迹角控制器设计

为提高舰载飞机的着舰精度,基于总能量控制理论设计了着舰下滑航迹角控制器。频域分析结果表明,该控制系统使航迹角的响应带宽为1.21rad/s,满足了设计要求。基于非线性模型的仿真结果表明,该系统不但能够使航迹角快速地响应阶跃输入指令和保持飞行速度基本不变,且对于气动参数的摄动具有较好的鲁棒性。     

Charging of dust grains by anisotropic solar wind multi-component plasma

In this paper we study the charging process of small grain particles by anisotropic multi-component solar wind plasmas (electrons, protons and heavy ions), versus two-component (electron/proton) plasmas. We are focusing attention on the important characteristics of the charging process, namely the charging time, floating potential and current content as functions of plasma parameters such as He⁺⁺/H⁺ (α/p) number density and T_α/T_p temperature ratios of alpha particles to protons, as well as plasma streaming velocity v₀. Measured statistical properties of solar wind plasma parameters at 1 AU show considerable variations in α/p-temperature ratios from 1 to 10, in α/p-number density ratio from 0.01 to 0.35, as well as in values of streaming velocity v₀ from 200 km/s to 1000 km/s and more. Periods of these variations could last for several days each, leading to significant variability in the charging process, according to newly derived general analytical expressions. Numerical calculations performed for protons/alphas plasmas showed large disparity in the charging characteristics. For example, in anisotropic plasma, grain charging time varies up to 90% depending on α/p-particles temperature and number density ratios, whereas changes in floating potential are up to 40%. In contrast, in isotropic plasma, charging characteristic for grains do not change very much for the same plasma parameters variations, with charging time varying about 12% and floating potential only varying about 4%. It is also shown that in highly anisotropic plasma, with all ballistic electrons and ions, dust grains could not hold their charges, and characteristic discharged time is calculated. We note that the analysis is equally applicable to any sized body immersed in solar wind plasma.     

Kinetic theory of sheath formation in solar wind plasma

We present a general self-consistent kinetic theory for plasma sheath formation in solar wind plasma. The theory could be applied to anisotropic, as well as to isotropic collisionless plasma without resorting to any simplifications, limitations, or assumptions, such as the necessary existence of a ‘pre-sheath’ region of ions acceleration to ensure the Bohm criterion. The kinetic framework is first applied to sheath formation around an arbitrary oriented planar absorbing surface, charged by solar wind anisotropic plasma, under the condition of negligible photoelectric effect. We then make use of our kinetic approach for the plane geometry in isotropic collisionless plasma, as a particular case of a planar electrode orientation parallel to plasma streaming velocity, also analyzing the sheath structure around spherical and cylindrical absorbing electrodes submerged in isotropic collisionless plasma. Obtained results demonstrate principal differences in spatial charge distributions in sheath regions between spherical or cylindrical electrodes of large size and an unbound planar surface submerged in isotropic plasma. In the case of a planar electrode, we directly compare results obtained in our kinetic and hydrodynamic theories and conventional hydrodynamic theory of plasma sheath formation. The outcome from the present study have direct implications to the analysis of plasma sheath structure and associated distribution in space of charged dust grains, which is relevant to the moon exploration near the optical terminator region or in shadowed craters in the moon.     

Two-manoeuvres transfers between LEOs and Lissajous orbits in the Earth–Moon system

The purpose of this work is to compute transfer trajectories from a given Low Earth Orbit (LEO) to a nominal Lissajous quasi-periodic orbit either around the point L₁ or the point L₂ in the Earth–Moon system. This is achieved by adopting the Circular Restricted Three-Body Problem (CR3BP) as force model and applying the tools of Dynamical Systems Theory.     

大型客机飞行员操作程序综合评价

机组对飞机的成功操作很大程度上依赖于一套精心编制的飞行员操作程序,不合理或不合逻辑的操作程序可能导致飞行员的违规操作,进而引发飞行事故.参考波音737NG飞行机组操作手册,分析进近和着陆阶段的任务功能流程后确定了评价指标体系的层次结构;采用德尔菲法对现役飞行员进行两轮咨询,建立了基于安全性的进近和着陆阶段飞行员操作程序综合评价指标体系;对飞行员进行咨询,采用序关系分析法确定了各指标的权重系数;应用模糊综合评价法对飞行员操作程序进行综合评价,得到了飞行员操作程序的评价等级和评价值.提出了一种将功能流程图法、德尔菲法、序关系分析法和模糊综合评价法相结合的飞行员操作程序综合评价方法,并应用于波音737NG飞机进近和着陆阶段的操作程序评价.评价结果说明了该综合评价方法的合理性.